Canon PowerShot S3 IS User Manual page 118

ri¥l •
When the camera is held vertically to shoot, the Intelligent
UJ
Orientation sensor judges the upper end to be "up" and the
lower end to be "down". It then regulates the optimal white
balance, exposure, and focus for vertical photography. This
function operates regardless of the on/off status of the Auto
Rotate function .
• The Auto Rotate function can be set forthe shooting and
playback modes separately.
- When the Auto Rotate function is set to [On] in shooting
mode, the orientation of the camera is recorded when the
shot is taken. Therefore, the image is automatically rotated
during playback mode based on the orientation of the
camera during shooting.
- When the Auto Rotate function is set to [On] in playback
mode, images will be rotated to their correct orientation in
the LCD monitor (or viewfinder) regardless of the camera's
orientation when shooting.
You can create a new folder at any time and the recorded images will
be automatically saved to that folder.
Create New Creates a new folder the next time you shoot images. To create an
Folder additional folder, insert another check mark.
Auto Create To create a new folder the next time you shoot after a specified date and
time, specify a date and time (p. 89).
88
1
iii
(Set up) Menu. [Create
Folder].
See Menus and Settings (p. 27)