Table of Contents
Advertisement
Quick Links
3.6V CORDLESS
SCREWDRIVER
STOCK No.63123
PART No.CD360L
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS TOOL.
07/2000
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of the
machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper CD360L
Summary of Contents for Draper CD360L
- Page 1 07/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the...
-
Page 2: Specification
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 3: General Safety Instructions For Power Tools
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 4: Health And Safety For Batteries
Do not dispose of batteries or cells in a charged condition. Expired nickel-cadmium batteries must be recycled/disposed of in accordance with the appropriate regulations or legislation. They should be returned to your local warranty agent/stockist. DRAPER HELPLINE ( 023 ) 8049 4344 - 4 -... - Page 5 GETTING TO KNOW YOUR CORDLESS SCREWDRIVER ✚✌ ✙✌ ✖✌ ✕✌ ✘✌ ✗✌ Torch on/off switch. Directional on/off switch. Torch cover. Bit holder. Hand grip. Charger unit. - 5 -...
-
Page 6: Operation
INSTALLING BITS The required screwdriver bit ✬✌ is pushed into holder ✭✌ Fig.2. Note: This holder will take ⁄ " (6.35mm) hexagon drive bits only. See Draper Catalogue for full range. Fig.3 ✮✌ DIRECTION SWITCH For screwing operations press the right hand side of the switch ✮✌. -
Page 7: Maintenance
OPERATION CONTINUED NOTE: To prevent slip or damage to the screwhead, match the screwdriver bit to the head size. MAINTENANCE Neither the cordless tool or charger require any special maintenance. Keep both the cordless tool and the charger in a dry place where they will not be exposed to frost or direct sunlight. - Page 8 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the CD360L and is the answer not in the manual?
Questions and answers