Advertisement

Quick Links

STORM
INSTRUCTIONS FOR
3.6V Cordless
Li-ion Screwdriver Kit
Stock No.83568
Part No.CD36LIASF
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 83568 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper 83568

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
  • Page 2: Title Page

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
  • Page 3: Table Of Contents

    CONTENTS 2.1 CONTENTS PAGE CONTENT PAGE TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY....................2 UNDERSTANDING THIS MANUAL ...............2 COPYRIGHT NOTICE....................2 CONTENTS CONTENTS ......................3 GUARANTEE GUARANTEE ......................4 INTRODUCTION SCOPE ........................5 SPECIFICATION ......................5 HANDLING & STORAGE ..................5 HEALTH & SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS ................6 TRANSFORMERS/BATTERY CHARGERS ..............7 BATTERY........................7 LITHIUM-ION MATERIAL DATA SHEET ..............7...
  • Page 4: Guarantee 3.1 Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
  • Page 5: Introduction

    This cordless screwdriver is ideal for applications such as assembling flat pack furniture. It is intended for domestic use only. Any other application is considered misuse. 4.2 SPECIFICATION Stock no..........................83568 Part no.........................CD36LIASF Integral battery pack: Type ......................Lithium-Ion Rated voltage ......................
  • Page 6: Health & Safety Information

    HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS Do not overreach. Keep proper footing and balance at all times. This enables better control of General Power Tools Safety Warnings the power tool in unexpected situations. Dress properly. Do not wear loose clothing or WARNING: Read all instructions.
  • Page 7: Transformers/Battery Chargers

    (230V) into normal operating conditions. If cell is ruptured another system of voltage (3.6V) for the sole hydrogen fluoride and carbon monoxide may purpose of recharging the Draper 3.6V be released. screwdrivers. Any other application is considered misuse.
  • Page 8: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION LED work light. Forward/reverse selector. Hand grip. Charger connection socket (female). Trigger switch. ¼" female hex. drive. Battery charge level test button. Battery charge level indicator lights. Handle release button. Carry strap.
  • Page 9: Unpacking & Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product.
  • Page 10: Basic Cordless Screwdriver Operations

    BASIC CORDLESS SCREWDRIVER OPERATIONS 8.1 BATTERY CHARGING – FIGS. 1 – 2 FIG.1 Insert the transformer's jack plug into the charger connection socket Plug the transformer into a 230V~13 amp 3 pin socket. Note: over the course of the full charging cycle (approximately 3–5 hours), the battery charge level indicator lights will progressively...
  • Page 11: Forward And Reverse Trigger Switch

    BASIC CORDLESS SCREWDRIVER OPERATIONS 8.2 FORWARD AND REVERSE TRIGGER SWITCH – FIG. 3 To activate the screwdriver, press trigger To change direction of rotation of the bit holder, i.e. clockwise or anticlockwise. Stop the screwdriver and push switch . When the direction switch is pushed to the left, the bit holder will rotate clockwise.
  • Page 12: Maintenance

    MAINTENANCE There are no replacement or maintainable parts to this product.
  • Page 13: Explanation Of Symbols

    10. EXPLANATION OF SYMBOLS 10.1 EXPLANATION OF SYMBOLS WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Class II construction (Double insulated). For indoor use only. Do not expose to rain. Non-Self-Resetting protective device. Fail-safe safety isolating transformer. Polarity indication.
  • Page 14: Disposal

    11. DISPOSAL 11.1 DISPOSAL At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area. In all circumstances: •...
  • Page 15 NOTES...
  • Page 16 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Help Line for details of an agent in your local area. YOUR DRAPER STOCKIST RDCH0416...

Table of Contents