Table of Contents
Advertisement
To start the playback of one file, you have to mark it with the arrow buttons and
Press the "Setup" key. The setup menu appears on screen as following.
Use the arrow keys to select a title or a submenu.
Press the "Enter" key to confirm the selection.
Press the "Setup" key to exit the setup menu.
Overview
OSD Language:
Screen saver:
Speaker settings
Downmix:
Audio settings
Audio output:
Video settings
Display:
TV type:
Video output:
Slideshow
settings
Factory settings:
Slide time:
Slide mode:
Photo overview:
then press "Play" or "Enter".
4.2 Settings
General steps for the original setup:
Choose the menu language.
Switch on/off the screen saver.
Set speaker downmix mode (Left/Right, Stereo, 5.1 Channel).
Choose from analog, SPDIF/PCM and SPDIF/RAW LPCM.
Output: Choose from LPCM 48k or LCPM 96k.
Set TV display mode (Letterbox, PanScan, Widescreen).
Set TV standard (multi system, PAL, NTSC).
Set video output resolution (CVBS, 720p, 1080i).
Advice: 720p and 1080i can only be displayed via HDMI
connection.
Select "Reset" and press "Enter" to load the factory settings.
Set the interval for the slideshow (5s / 10s / 15s).
Set a transition effect for the slideshow.
Switch photo overview on/off.
Advertisement
Table of Contents
