DC bias Erasing system: Magnet erasure Power source: DC 3V using two R6 (size AA) dry cell batteries AC house current using the AC adaptor (Aiwa AC-D302) Battery life: See “Battery life” above Maximum outside dimensions: 111.7 (W) x 84.3 (H) x 33.6 (D) mm (excluding projecting parts and controls) Weight: Approx.154 g (excluding batteries)
ELECTRICAL MAIN PARTS LIST REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C133 87-010-501-040 E/CAP GAS 47-4 C134 87-010-502-040 CAP ELECT GAS 100/4 87-A21-657-080 C-IC,AN7086S C141 87-010-821-040 CAP,E 100-4 (MJ) 87-A21-224-040 C-IC,LB1877M C142 87-A12-317-080 C-CAP,U 0.1-50 Z F C301 87-010-822-040 CAP,E 220-4 (MJ)
Page 9
ADJUSTMENT 1. Tape Speed Adjustment Settings : • Test tape : TTA–100(TAPE CENTER) • Test point : Phones Jack (J102) • Adjustment location : SFR301 • PAUSE : • VOLUME : Maximum • TAPE SPEED : Normal (speed volume center) Method : Play back the test tape, adjust SFR301 for 3000 Hz ±...
Need help?
Do you have a question about the TP-VS535 and is the answer not in the manual?
Questions and answers