To Take Out A Cassette When Not Eject (Force Eject) - Sony CCD-TRV138 Service Manual

1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to "SECTION 2. DISASSEMBLY" to remove the mechanism deck block.
2 Disconnect CN401 (2P) of VC-341 board.
3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.
5 Let go your hold the cassette
compartment and rise the cassette
compartment to take out a cassette.
CCD-TRV138/TRV238E/TRV338/TRV438E
4 Pull the timing belt in the direction of
arrow A with a pincette while pressing
the cassette compartment (take care
not to damage) to adjust the bending
of a tape.
Pincette
A
Timing belt
A
Timing belt
Press the cassette compartment not to
rise the cassette compartment
Adjust the bending of a tape
1-2
[DC power supply]
(+5V)
Loading motor
Disconnect CN401
of VC-341 board.