How To Change The Beep Tone - Panasonic NE-C1153 Operating Instructions Manual

When Program Lock is activated, you can not change the Beep Tone.
Please release the Program Lock. (See page 17.)
ACTION
1 Open Door.
2 Press
Program Key.
Prog
3 Press
Beep Key.
Beep
4 Press
Program Key.
Prog
The loudness of Beep Tone and its duration at the end of heating cycle can be set.
There are four levels of the loudness and three levels of duration.
The 3b-1 is preset at factory.
No.Presses Display
Beep
1 3b-1
2 3b-2
3 3b-3
4 2b-1
5 2b-2
6 2b-3
7 1b-1
8 1b-2
9 1b-3
10 0b

How to change the Beep Tone

INFORMATION
The oven lamp will come on.
Keep key pressed for 2 seconds until "P" is
displayed.
KEEP DOOR OPEN.
Press Beep Key to choose loudness and duration
required. (See below.)
(eg. twice)
After 3 seconds
Display returns to "0".
loudness
Loudest beeps for 60 seconds
Loudest short beeps 3 times
Loudest long beeps 3 times
Middle beeps for 60 seconds
Middle short beeps 3 times
Middle long beeps 3 times
Quietest beeps for 60 seconds
Quietest short beeps 3 times
Quietest long beeps 3 times
Silent
- 20 -
duration
---
DISPLAY
MICRO
TIME PROGRAM
STAGE
1
2
3
PREHEAT
CONV %
MICRO
TIME PROGRAM
STAGE
1
2
3
PREHEAT
CONV %
MICRO
TIME PROGRAM
STAGE
1
2
3
CONV PREHEAT %
MICRO TIME PROGRAM
STAGE
1
2
3
CONV PREHEAT %
After 3 seconds
MICRO TIME PROGRAM
STAGE
1
2
3
CONV PREHEAT %