Connect The Power Adapters - Swann SWNVK-47082H Quick Start Manual

Connect the Power Adapters

Included are two power adapters. First connect the PoE power adapter to the PoE socket on the NVR so the cameras
have power. Screw the small retention ring to ensure the plug doesn't fall out. To power the NVR connect the power
adapter to the power input.
All connections have now been completed. You're now ready to run through "The Setup Wizard" to configure your NVR.
eSATA
DC 12V
USB HDMI VGA
IN
PoE Power Adapter
1 3 5 7
PoE
2 4 6 8
LAN
9