Subscribe to Our Youtube Channel
Related Manuals for Swann NVR
Summary of Contents for Swann NVR
- Page 1 Network Video Recorder Quick Start Guide Welcome! Let’s get started. QH460200814E | © Swann 2014 1 1 1...
-
Page 2: Getting To Know Your Nvr
Getting to know your NVR Congratulations on the purchase of your Swann NVR. This quick start guide will assist you on getting your NVR up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping. -
Page 3: What Does This Mean
What does this mean Here are explanations for the various connections and 11) Power LED - This light will turn on when the NVR has lights on the NVR - power. 1) Power - This is where you connect the power adapter. -
Page 4: Installing The Wi-Fi Antenna
As there are several Wi-Fi antennas of the NVR and the provided, use the longer version for camera is a connection the NVR and the shorter ones for the for the Wi-Fi antenna. camera. Use a clockwise motion to connect. -
Page 5: Connecting The Cameras
Connecting the Cameras To reset the camera, The LAN port is mainly press and hold the reset used configure button, connect power and camera your Wi-Fi continue holding for 10 network. seconds. Connect the output connection of the power extension cable to the power input on the camera. -
Page 6: Connect To Your Home Network
It’s important that you do this, as this allows you to access the NVR from your smartphone or tablet. It also allows the NVR to connect to the Internet to update its internal clock so the time it shows on the video is always accurate,... -
Page 7: Connect The Mouse
Connect the Mouse Connect the mouse (supplied) to one of the USB ports located at the back of the NVR. DC 5V HDMI... - Page 8 Connect the NVR to your HDTV Connect the HDMI cable (supplied) to the HDMI output on the NVR, and connect the other end to a spare HDMI input on the HDTV. Make sure your HDTV input matches the physical connection used to connect your NVR.
-
Page 9: Connect The Power Adapter
Connect the Power Adapter Connect the 5V power adapter (supplied) to the power input on the NVR then connect the power adapter into an electrical outlet. DC 5V HDMI All the connections have now been completed. You’re now ready to run through “The Setup Wizard” to configure your...
Need help?
Do you have a question about the NVR and is the answer not in the manual?
Questions and answers