Technical Information; Installation Instructions; Moving And Installing Your Appliance - Summit SCF1076 Instruction Manual

Commercial ice cream freezers

Hide thumbs

Table Of Contents

Table of Contents

Model

Installation

Capacity

Electrical Input

Power Input

Rated Current

Refrigerant

Unit Weight

Unit Dimensions

NOTE: Specifications are subject to change without notice.



This appliance is meant for free-standing installation; it should not be built-in.



Do not store or install the appliance outdoors.



This appliance is designed for the storage of frozen items. Do not use it to store

medicine or other medical products.

Moving and Installing Your Appliance



When transporting, keep the unit vertical as much as possible. The angle between

the vertical and the side of the unit should never exceed 45° since this could affect

the compressor and result in abnormal operation. Never turn the unit upside down.



After unpacking the unit, remove the packing materials and attach the casters (see

following section). Place the unit on a level and sturdy floor near a power socket.



Leave at least 4" of space between the back and sides of the unit and the

surrounding walls for ventilation.



Keep the unit away from heat sources and avoid direct sunlight.



Never place the unit in a location with high humidity or where water can reach it.



It is recommended that you install the appliance in a place where the ambient

temperature is between 72º and 78º F (23º -26º C). If the ambient temperature is

above or below the recommended temperatures, the performance of the unit may be

affected. For example, placing your unit in extreme cold or hot conditions may cause

interior temperatures to fluctuate.