Technical Information; Installation Instructions; Moving And Installing Your Appliance - Summit SCFU386 Instruction Manual

Countertop display freezer
Table of Contents

Advertisement

Climate Class
Installation
Capacity
Electrical Input
Power Input
Rated Current
Refrigerant
Lamp Wattage
Unit Weight
Unit Dimensions
NOTE: Specifications are subject to change without notice.
This appliance is meant for free-standing installation; it should not be built-in.
Do not put heavy items on top of the unit.
Do not store or install the appliance outdoors.
This appliance is designed for the storage of frozen items. Do not use it to store
medicine or other medical products.

Moving and Installing Your Appliance

When transporting, keep the unit vertical as much as possible. The angle between
the vertical and the side of the unit should never exceed 45° since this could affect
the compressor and result in abnormal operation. Never turn the unit upside down.
Remove the packing materials and place the unit on a level and sturdy floor near a
power socket.
Leave at least 4" of space at the back, sides and top of the unit to ensure adequate
ventilation. Level the unit with the four adjustable feet.
Keep the unit away from heat sources and avoid direct sunlight.
Never place the unit in a location with high humidity or where water can reach it.
It is recommended that you install the appliance in a place where the ambient
temperature is between 78º and 89ºF (26º to 32ºC). If the ambient temperature is
above or below the recommended temperatures, the performance of the unit may be
affected. For example, placing your unit in extremely cold or hot conditions may
cause interior temperatures to fluctuate.

TECHNICAL INFORMATION

Model

INSTALLATION INSTRUCTIONS

SCFU386
N
Free-standing
3
2.0 ft
115V AC 60Hz
155W
4.0A
R134a, 3.18 oz
8W
83 lbs
24.7" W X21.7"D X 23.4"H
6

Advertisement

Table of Contents
loading

Table of Contents