Specification - NOVO 485HTO-100 Owner's Manual

4
Specifications
Factory Settings
Salt Used - Per Regeneration
Water Used - Regeneration
Hardness Removal - Grains
Tank #1 Carbon Quantity - Cubic Feet
Tank #2 Resin Quantity - Cubic Feet
Tank Size
Tank Jacket / Media Loaded
Brine Tank / Cabinet Size (Inches)
Salt Storage Capacity
Flow Rate @ 15 psi Pressure Drop
Flow Rate @ 25 psi Pressure Drop
Back Wash Flow Rate
Shipping Weight
Regeneration Type
Plumbing Connections
Resin Type
Carbon Type
Electrical Requirements
Water Temperature
Water Pressure

Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.

The manufacturer reserves the right to make product improvements which may deviate from the specifications and
descriptions stated herein, without obligation to change previously manufactured products or to note the change.

* Models are not tested or certified by WQA
Tools, Pipe, and Fittings, Other Materials
Pliers

Screwdriver

Teflon tape

Razor knife

Two adjustable wrenches

Additional tools may be required if modifi-

cation to home plumbing is required.
Plastic inlet and outlet fittings are included

with the softener. To maintain full valve
flow, 3/4" or 1" pipes to and from the sof-
tener fittings are recommended. You
should maintain the same, or larger, pipe
size as the water supply pipe, up to the
softener inlet and outlet.
Use copper, brass, or PEX pipe and fittings.

Specifications
485HTO-100
15010484
6.0 lbs
86.4 gal
25,000
3
1.0 ft
3
1.0 ft
9x48
Yes
18.1 x 34.5
240 lbs
7.2 gpm
10.0 gpm
4.0 gpm
154 lbs
Before Starting Installation
485HTO-150
15010485
9.0 lbs
148 gal
37,500
3
1.50 ft
3
1.50 ft
10x54
Yes
18.1 x 34.5
240 lbs
7.4 gpm
10.1 gpm
5.0 gpm
171 lbs
Counter Current / Up Flow
3/4" (Optional 1")
Canature 8% High Capacity Ion Exchange Resin
Canature Catalytic Carbon
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Some codes may also allow PVC plastic

pipe.
ALWAYS install the included bypass valve,

or 3 shut-off valves. Bypass valves let you
turn off water to the softener for repairs if
needed, but still have water in the house
pipes.
5/8" OD drain line is needed for the valve

drain. A 10' length of hose is included.
with some models.
A length of 5/8" OD drain line tubing is

needed for the brine tank over flow fitting
(optional).
Nugget or pellet water softener salt is

needed to fill the cabinet or brine tank.
485HTO-200* 485HTO-300*
15010486 15010487
12.0 lbs 18.0 lbs
162.4 gal 224.8 gal
50,000 75,000
3
2.0 ft 3.0 ft
3
2.0 ft 3.0 ft
12x52 14x65
No
20.3 x 37.4 23.0 x 40.5
350 lbs 420 lbs
9.0 gpm 9.2 gpm
11.9 gpm 12.1 gpm
7.0 gpm 10.0 gpm
214 lbs 232 lbs
3
3
No