Initial Setup - Kenwood DNX571TR Quick Start Manual

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.121).
1
Set each item as follows.
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1 Touch [SET].
2 Select the desired country.
Language
Select the language used for the control screen and setting items. Default is "American English (en)".
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see
AV-IN SETUP
Select the source connected to AV-IN.
1 Touch [SET].
2 For AV-IN Interface, touch [Rear Camera] or [AV-IN] to select the source.
3 For AV-IN Name, touch [2] or [3] to select the name.
For detailed operation, see
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [6].
For detailed operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see
Language setup (P.95).
AV Input Setup (P.101).
Panel color coordinate (P.98).
].
Camera Setup (P.100).
Return to the Top page
Basic Operations
Continued
9