Kenwood DNX571TR Quick Start Manual page 21

Ñ Connecting wires to terminals
Ignition key
switch
Car fuse
box
(Main fuse)
Battery
To steering remote
To use the steering wheel remote
control feature, you need an exclusive
remote adapter (not supplied) matched
to your car.
To car light control switch
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
To use the Mute feature, you need to
hook up this wire to your telephone
by using a commercial telephone
accessory.
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
power terminal for the booster amplifier
of the film-type antenna.
(Max. 300mA, 12V)
When using the optional power
amplifier, connect to its power control
terminal.
ACC
Red (Ignition wire)
Yellow (Battery wire)
Car fuse
Black (Ground wire) ¤
box
(To car chassis)
A
A
Light Blue/Yellow
(Steering remote control wire)
REMOTE CONT
Orange/White
(Dimmer control wire)
Brown (Mute control wire)
Blue
(Antenna control wire)
Blue/White
(Power control wire)
If no connections are made,
do not let the cable come out from the tab.
Fuse (10A)
Accessory 1
White/Black
White
Gray/Black
Gray
Green/Black
STEERING WHEEL
REMOTE INPUT
Green
ILLUMI
Purple/Black
Purple
MUTE
ANT CONT
P. CONT
To front left
speaker
+
To front right
speaker
+
To rear left
speaker
+
To rear right
speaker
+
Speaker impedance: 4-8 Ω
English ñ
21