When The “Timeout” Error Is Displayed - Yamaha RX-V661 Service Manual

RX-V661/HTR-6060/DSP-AX761
* When the "Timeout" error is displayed:
Press the [Cancel] button and check the following
items again.
a. Is the power cable of the main unit connected to
the AC outlet?
b. Reconnect cables, etc. being used in Step 3 of
the operation procedure and start "Flash
Sta.exe" again.
8. Press the [Refer...] button and select "Vx61_xxx.mot".
(Fig. 3)
9. After selecting MCU Type: "M16C/80 M32C", press
the [OK] button. (Fig. 3)
"M16C Flash Start" is displayed. (Fig. 4)
20
When the [Refer...] button is pressed, the "Open File" screen is displayed.
Select the firmware "Vx61_xxxx.mot".
Select "M16C/80 M32C".
When the [OK] button is pressed, "M16C Flash Start" is displayed.
Fig. 3