1. GENERAL
Location of controls
2-3. Main Board ......................................................................... 8
2-4. Heat Sink ............................................................................. 9
2-6. Lever Section .................................................................... 10
2-7. Servo Board ....................................................................... 10
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
• Connect the MAIN board (CNP701) and the SERVO board (CN1)
with the extension cable (Part No. J-2502-062-1).
TABLE OF CONTENTS
MAIN BOARD CNP701
CDX-CA600/CA600X
........................................ 33
SERVO BOARD CN1
3