MENU
The monitored image can be recorded automatically by setting the start and end
times in TIMER SET SETTING MENU, we can set the schedule for every days
recording in a week
(1) WEEK: This select the day for the timer. Records on schedule each day's.
(2) START: This is used to enter the start time for timer recording.
(3) STOP: This is used to enter the end time for timer recording.
(4) Speed :
When SPEEED FORMAT set by HOUR, the recording speed can setting from
2/3 (NTSC/PAL) HR to 960HR.
When SPEED FORMAT set by FPS, the recording speed can setting for
1~60/1~50(NTSC/PAL)FPS.
(5) Quality : There are six recording picture quality levels
LOWER
LOW
BASIC
STANDARD
HIGH
SUPERIOR
(6) SET: Set "ON" when using timer recording.
Set "OFF" when not using timer recording.
(7) DLY : Record on same schedule every day.
: Press
: Press
2002/04/24
12:00:00
For continuous recording, the quality level is unable to change.(Figure 1) The Seg 1 and Seg 2
will be treated as the continuous recording 08:30~00:00.
If you need to set different quality level, Please set as the Figure2.
:
15 KB
:
20 KB
:
25 KB
:
30 KB
:
35 KB
:
40 KB
or
to move the cursor to the left or right.
or
or Jog Dial to change the value.
T. RECORD
.
002 HR
08:30~17:00
Seg 1
Seg2
17:00~00:00
(Figure 1)
In Timer Recording mode, the date/time is Timer date/time
and the right part shows T . RECORD and Timer recording
rate.
08:30~17:00
Seg 1
Seg2
17:01~00:00
(Figure 2)
17