Table of Contents
Advertisement
13
ENTER : Press this key to confirm the selection or data changed.
14
MENU : Press this key to enter Setup menu.
15
Remote Control
Jog and Shuttle Dial
16
17
Up/ Down : (1) In Menu mode, press those keys to change data.
Left/ Right : In Menu mode, those keys are used to move cursor.
18
LCD Display
2002/04/24
12:00:00
2002/04/24
12:00:00
IR Remote receiver
Shuttle Dial : In Playback mode, turn shuttle dial can fast
forward/rewind the picture.
In Pause mode, turn shuttle dial can slow forwards/rewind
the picture.
In Menu mode, turn shuttle dial can change menu page
forwards/rewind.
In Pause mode, turn the jog dial can forwards/rewind the
Jog Dial
:
Picture by one field.
In Menu mode turn the jog dial clockwise, for increase the cursor
data which show on the system. Turn the jog dial counterclockwise,
for decrease the cursor data which show on the system.
(2) In Record/Playback mode, press those keys to change the Record/Playback
speed.
SYS LOAD
002 HR
STANDARD
002
HR
Front Panel Keypads
Switch on the power, "system loading" will be shown 10
seconds, both in LCD display & Main monitor.
In Standby mode, the date/time is current date/time and the
right part shows the quality and rate setting for normal
recording.
4
Advertisement
Table of Contents
