Turning The Power Switch On; Selecting The Operation Mode; Setting The Original - Panasonic KX-MB2000C Important Information Manual

1. Important Information
Notice:
R Install your machine near a supervised area to
prevent illegal copies from being made.

1.4 Turning the power switch ON

Turn the power switch to the ON position (A).

1.5 Selecting the operation mode

(Scan/Copy) (Fax: KX-MB2030
only)
You can select the desired mode by pressing one of the
following buttons.
KX-MB2000
KX-MB2010
– MScanN: Select this mode when using the unit as a
scanner.
– MCopyN: Select this mode when using the unit as a
copier.
– MFaxN (KX-MB2030 only): Select this mode when
using the unit as a fax machine.
6
A
KX-MB2030
Detailed operating instructions are on the CD-ROM.

1.6 Setting the original

1.6.1 Using the scanner glass
1
Open the document cover (A).
2
Place the document FACE DOWN on the scanner
glass (B), aligning the top left of the document with
the corner where the
3
Close the document cover.
1.6.2 Using the automatic document feeder
(KX-MB2010/KX-MB2030 only)
A
* The pictured model is KX-MB2010.
1
Insert the document (up to 20 pages) FACE UP into
the feeder until a single beep is heard.
2
Adjust the width of the document guides (A) to fit the
actual size of the document.
A
B
mark is positioned.