Multi Screen Setup Screen [Multi-Screen Setup] - Panasonic AW-HE130KP Operating Instructions Manual

Web screen configurations (continued)

Multi screen setup screen [Multi-Screen setup]

The cameras whose images are to be displayed on the multi screen are
set here.
IP address
Input here the IP address of the camera whose images are to be
displayed on the multi screen or the host name. With one group
consisting of 4 cameras, up to four groups of cameras (a total of 16
cameras) can be registered.
Input as follows if the HTTP port number of the camera whose images
are to be displayed has been changed.
IPv4 address entry example
IPv6 address entry example
Enter the following when connecting via HTTPS.
Example of input
Maximum number of characters
Factory settings:
Cam 1: selfcamera
Cam 2 to Cam 16: Not registered
<NOTE>
• When connecting via HTTPS, install the security certificate for the
camera to be displayed. (→ page 99)
• This unit is configured for cameras for which "selfcamera" is
displayed for the IP address or host name.
• When configuring a host name, the DNS settings of the personal
computer that will display the multi screen must be configured.
For details on the personal computer's DNS settings, consult your
network administrator.
86
http://192.168.0.10:8080
http://[2001:db8:0:0:0:0:0:1]:8080
https://192.168.0.10/
1 to 128 half-size characters
Camera title
Input the camera title here. The camera title which has been input is
displayed on the multi screen.
Maximum number of characters 0 to 20 half-size characters
Invalid characters
Factory settings:
Cam 1: The product number appears.
Cam 2 to Cam 16: blank
<NOTE>
• When a 16-screen multi screen is selected, camera titles may be
only partially displayed.
• Multi screen displays are displayed in 4:3 aspect ratio.
Symbols