Panasonic AW-HE130KP Operating Instructions Manual page 55

Camera menu items (continued)
Changing the format
„
When the currently selected format is changed in the [Output] screen,
the pre-format-change confirmation screen appears.
Pre-format-change confirmation screen
F o r m a t
Do y o u w a n t t o s e t
For m a t ( 1 0 8 0 / 5 9 . 9 4 i ) ?
CAN C E L
O.K .
• The format to be set is displayed within the parentheses on the
screen.
• When you move the cursor to [O.K.] on the pre-format-change
confirmation screen and confirm, the post-format-change
confirmation screen appears.
Post-format-change confirmation screen
F o r m at
Are y o u O.K.?
No
Yes
• If you move the cursor to [Yes] and confirm, the display returns to
the [Output] screen in the post-change format.
• If you move the cursor to [No] and confirm, the display returns to the
[Output] screen in the pre-change format.
The same occurs if an operation is not performed within 10
seconds.
• If an external sync signal that does not match the changed format is
input, the image will be distorted.
Change the external sync signal, or perform internal
synchronization.
Changing the frequency
„
When the currently selected frequency is changed in the [Output]
screen, the pre-frequency-change confirmation screen appears.
Pre-frequency-change confirmation screen
F r e q u e n c y
D o y o u w a n t t o s e t
F r e q u e n c y ( 5 9 . 9 4 H z ) ?
C A N C E L
O . K .
• The frequency to be set is displayed within the parentheses on the
screen.
• When you move the cursor to [O.K.] on the pre-frequency-change
confirmation screen and confirm, the frequency is changed.
<NOTE>
• When using a monitor that does not support 59.94Hz/50Hz
frequencies, images may not be displayed after the frequency is
changed. Before changing the frequency, verify that your monitor
supports the frequency.
55