Removing The Battery; Installing The Memory Card - Honeywell Dolphin 75e Quick Start Manual

Removing the Battery

1. Power Off the terminal.
2. Perform the steps illustrated below to remove the battery.
1

Installing the Memory Card

Note: Format microSD/SDHC card before initial use.
1. Power Off the terminal.
2. Unlock and remove the
battery door.
3. Pull the battery latch back
and remove the battery.
4. Lift the card retention flap.
5. Slide the card (contacts facing
down) into the socket, and
then close the retention flap.
6. Install the battery and
battery door, and then
engage the lock.
7. Press the Power button
2
.
3
4
5