Honeywell Dolphin 75e Quick Start Manual page 13

Using the Scan/Image Engine Demo
1. Touch All Apps
2. Point the Dolphin terminal at the
bar code.
Note: For optimum performance,
avoid reflections by scanning
the bar code at a slight angle.
3. Touch and hold Scan or press and hold the Scan button. Center the
aiming beam over the bar code.
Note: The left and right side buttons also trigger the scan/imager.
4. The decode results display on the screen.
Aiming Beam
The aiming beam or pattern is smaller when the terminal is closer to the
code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer
to the unit. Symbologies with larger bars or elements (mil size) should be
read farther from the unit.
Linear Bar Code
2D Matrix Symbol
> Demos > Scan Demo .