Contents SAFETY ……………………………………………………………….………………………………….………………..…….2 CAUTIONS…………………………………………………………………………………………...…….…………………….3 FCC RF INTERFERENCE STATEMENT …………………………………….………….………………...………………...3 CONNECTING WITH EXTERNAL EQUIPMENT……………………………..…………..……………….……………….. 4 CONTROLS AND FUNCTIONS……………………………………………..………..………………………..….……..5-7 MOUNTING GUIDE ……………………………………………………………..……….……………...……….……..……..8 ACCESSORIES …………………………………………………………………………………………..…………………….8 POWER INDICATOR……………………………………………………………………………………….…………………..9 DIMENSIONS …………………………………………………………………………………………….……………………..9 SPECIFICATIONS…………………………………………………………………….……………...…………………..……10 Safety 1. Read these instructions completely and comply with all requirements. 2. Retain these instructions for reference. Comply with all instructions and warnings, both in this manual and on the product.
A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the monitor. C. If the monitor has been exposed to rain, water or other liquids. D. If the monitor does not operate as expected as per the operating instructions. Adjust only those controls as de- scribed in the operating instructions;...
- Reorient or relocate the receiving antenna. - Increase the space between the equipment and receiver. - Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. - Consult the dealer, an experienced radio, or a TV technician for help. - Only a shielded interface cable should be used.
Controls & Menu Operation CONTROL KEYS/BUTTONS Buttons are located on the right side of the bezel. To change the input selection, press SOURCE to display the pop-up menu, use up/down to highlight the desired source, then press ENTER to complete the selection. To verify the current input selection, press SOURCE to display the pop-up, then press SOURCE again to dismiss the pop-up.
stores custom adjustments to contrast/brightness/hue/ saturation/sharpness. B. Picture Menu for VGA and some HDMI Adjustments Contrast: Adjusts the contrast between light and dark areas of the picture. Brightness: Adjusts the overall picture shade and brightness. Color Temp: To adjust color reproduction choose between normal, warm (more red) &...
Page 7
H-Position: OSD horizontal position on the screen. V-Position: OSD vertical position on screen. Duration: OSD Menu timeout. Halftone: OSD Menu background opacity (allows viewing of the video behind the OSD menu). Reset Defaults: Restore monitor to factory default settings. Version: Displays firmware version number (not adjustable). 4.
Mounting Guide CAUTION : The wall mount must bear a minimum of five times the monitor‟s net weight. To mount your MONITOR to the wall or another surface, you need to purchase a VESA wall mount. Use four M4 x 8mm screws (the base attachment screws removed in step 1 below are M4 x 8mm) to attach the mount.
When there is no video, the monitor remains ON to be instantly ready to display video when the source is changed or if a PC changes state from sleep/standby to active mode. A floating Dimensions “No Signal” box moves slowly Model: NTH-LED18 NTH-LED22 across the screen until video is re- inch inch Letter Dimension stored.
Specifications Model NTH-LED18 NTH-LED22 Screen diagonal dimension 18.5 21.5 (inches) Viewable area W x H (inches) 16.63 x 9.57 18.81 x 10.60 Led Type Pixel Pitch (mm) 0.28 0.248 1360x768 1920x1080 Screen Maximum Resolution 720x400; 640x480; 800x600; 1024x768; 1280x1024; Supported Panel 720x400;...
Need help?
Do you have a question about the NTH-LED18 and is the answer not in the manual?
Questions and answers
How to unlock keys on nth-18.5" monitor