Satellite Link; Dubbing A Cassette Tape - FUNAI DV220FX5 Owner's Manual

Satellite Link

You can set the unit to start recording whenever it detects
a video signal from the external tuner.
Preparing for the Satellite Link:
• Only L1 (rear) is available for satellite link and be sure
that this L1 needs to be connected by the external tuner.
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set it
to the output audio/video signals when it comes to the
time you want to start recording, and stop those signals
when it comes to the time you want to finish recording.
Refer to the tuner's manual on how to set the timer.
L1
DVD DVD/VCR VCR
COMPONENT
DIGITAL AUDIO OUT
AUDIO OUT VIDEO OUT
AUDIO OUT
L
Y
AUDIO IN
L R
CB
COAXIAL
VIDEO OUT VIDEO IN
R
CR
Press first.
V VHS VHS VHS V S VHS V V V VHS
1
Press to select the desired
tape speed.
2
In the stop mode, press
3
Use / to select
"SATELLITE LINK". Then, press
to go to the next step.
4
Use / to select the
desired hour. Then, press
go to the next step.
Then, repeat procedures above to
select the minute as well.
The hour can be selected from 1-12 with AM or
PM.
When the external tuner signal is stopped,
recording will be stopped.
5
Press to set satellite
link standby mode.
[TIMER REC] indicator: lights up and the unit
goes to the DVD mode. If you do not use DVD
function, turn OFF the unit.
An external tuner must be turned ON for
satellite link to start. If external tuner is not set
to output signals, satellite link will remain in
standby mode.
22
RECORDING
VCR
external tuner
To video out jack
AUDIO IN
VIDEO IN
To audio(L)out jack
RCA audio/video cables
SP
SETUP
- M E N U -
TIMER PROGRAMMING
B SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
SATELLITE LINK
to
0 1 : 0 0 PM
SATELLITE LINK
0 1 : 3 0 PM
[ON]
To Cancel the Satellite Link on Standby: To Cancel the Satellite Link on Standby:
Press [TIMER SET] on the remote control or
[C A] on this unit.
To Cancel the Satellite Link in Progress: To Cancel the Satellite Link in Progress:
Press [C A] on this unit.
Note: • Recording picture will be distorted if the copy
protection signal is being detected during satellite
link.
• When the timer recording and the satellite link
are overlapped, those recordings are recorded as
illustrated below.
e.g.) In case of the satellite link is overlapped on the exist- g
ing timer recording.
timer recording
satellite link
recording result
e.g.) In case of the timer recording is programmed in the g
middle of the satellite link.
timer recording
satellite link
recording result
e.g.) In case of the timer recording is overlapped on the
existing satellite link.
timer recording
satellite link
recording result
[OFF]

Dubbing a Cassette Tape

Warning: Unauthorized recordings of copyrighted
cassette tapes may be an infringement of
copyright laws.
output jacks of
VIDEO OUT
external device
AUDIO OUT
or
L
R
You can use a video disc player, cable/satellite box or
other devices with Audio/Video output jacks.
Press
VHS VHS V V V V VHS VHS V S VHS
1) Press [SPEED] on the remote control to select
recording speed (SP or SLP).
2) Press [INPUT] on the remote control to select L1 or L2
whichever Jack the external device is connected to.
3) Press [REC] on the unit, and then start playback of the
external device.
4) To stop recording, press [C A] on this unit.
5) Stop playback of the external device.
Note: • For best results during dubbing, use buttons on this
unit whenever possible. The remote control might
affect another device's operation.
g
RCA video cable
L2
RCA audio cable
first.
front of the unit
VIDEO AUDIO
EN