Installation
Instructions
Questions? Call 1.800.361.3400.
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Skill level – Installation of this appliance
requires basic mechanical skills.
• Completion time – Refrigerator Installation
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
If the refrigerator has already been installed,
remove the base grille (see Step 2 in Moving
the Refrigerator), then skip to Step 5 in
Installing the Refrigerator.
— Save these
— Observe all
30 minutes
Water Line Installation
30 minutes
Refrigerator
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have
to be connected to a cold water line. A GE
water supply kit (containing tubing, shutoff
valve, fittings and instructions) is available
at extra cost from your dealer, or from Parts
and Accessories, 1.800.661.1616.
TOOLS YOU WILL NEED
3/8" and 5/16" Socket
Phillips Head Screwdriver
17
Models 23 & 25
1/2" and 7/16" Wrench
Plastic Putty Knife