THE INSTALLATION SPACE The finished cutout width must be 35-1/2". Water And Electrical Locations The Cutout Depth Must Be 24" Minimum Cutout Depth Beneath a Soffit: Additional Specifications Note: Design Guide DIMENSIONS AND CLEARANCES 35" Case Width *83-1/2" Rear Depth Including Handles: 26-7/8"...
Page 4
25" 2" Min. to 15" 130° Door Wall Swing 130° 5"...
Page 6
Refrigerator or Freezer Case Trim 23-7/8" From Rear of Unit Cabinet Front 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" Door 3/4" Overlay 1/4" Panel (Nominal Size) 1/2" 3/4" 1" 1-1/4"...
Page 7
3/4" Overlay Panel .10" Thick Spacer Panel Standard Door Handle 1/4" Thick Backer Panel Standard supplied handles shown in 3/4" overlay panel position. Standard Door Handle Framed Panel Standard supplied handles shown in 1/4" panel position.
Page 8
5/16" Trim Door Reveal 1/4" Panel Grille Panel Door Panel Overlay Panel Door Overlay Panel Spacer Panel Backer Panel 1/4" .10 Inch Backer Spacer Panel...
Page 17
Pin Location For 90° Door Swing Pin Location as Shipped For 130° Door Swing...
Page 18
Handle Trim Use Front Holes to Secure Trim Use Rear Holes Standard supplied handle shown to Secure Handle Door Trim Door in 1/4" panel position.
Page 19
Door Trim Handle Trim Door Move Forward For 3/4" Panel Use Front Holes to Secure Handle Use Rear Holes to Secure Trim Supplied handle shown in the overlay panel position.
Page 20
Icemaker House Freezer Water Supply Water Supply Power Feeler Arm Switch Supplied Toekick 1/4" or Thicker Toekick...
Page 24
® For Monogram local service in your area, call 1.800.444.1845.
Need help?
Do you have a question about the Built-In All-Refrigerator/Freezer and is the answer not in the manual?
Questions and answers