DC-400
This heavy-duty, industrial, three-phase multi-process power source from
Lincoln Electric scores big in MIG, flux-cored, submerged arc, stick and DC
TIG welding. It's a great choice for arc gouging too. And flexibility doesn't
mean complicated – the DC-400 is easy to set-up and use. Changeover
between processes is as simple as turning a switch with the factory or field
installed multi-process switch. On-board ammeter and voltmeter make
monitoring of key welding parameters a snap. Inductance and arc force
controls allow the operator to efficiently refine the arc for the job at hand.
Technical Specifications
Product
Product
Name
Number
Input Power
(1) NEMA Class I Rated Output / Based on a 10 min. period.
(2) Add 3.3 in. (84mm) for lift bail.
Multi-Process Switch, Remote Output Control, Deluxe
Adjustable Gas Regulator and Hose Kit, Undercarriage
Accessory Kit
Pro-Torch™ TIG Torches, TIG Module, Docking Kit, Hand
Amptrol™, Foot Amptrol, Remote Control Adapter, Amptrol
Adapter Kit, Water Valve, TIG Control Cable Extension
LN-7, LN-7 GMA, LN-742, LN-8, LN-9, LN-9 GMA, LN-10,
DH-10, LN-15, LN-23P, LN-25, Cobramatic
LT-7
K1308-11 DC-400 230/460/3/60
K1308-12 DC-400 (w/Multi-Process Switch) 230/460/3/60
K1309-20 DC-400 220/380/440/3/50/60
K1309-21 DC-400 (w/Multi-Process Switch) 220/380/440/3/50/60
Rated Output
(1)
Input Current @
Current/Voltage/Duty Cycle
Rated Output
MULTI-PROCESS WELDERS
CC
DC
CV
Dimensions
H
(2)
x W x D
Output Range
in. (mm)
www.lincolnelectric.com
(Shown with
Multi-Process
Switch option)
3
60
50
Hz
Hz
PHASE
®
, NA-3, NA-5,
Net Weight
lbs.(kg)
E5.20
11/02