Advertisement
Contents:
• Parts List
• Introduction
• Important Safeguards
• How to Use Your Appliance
• Tips
• How to Clean Your Appliance
• Technical Specifications
Parts List:
A. Meat Pusher
B. Tray
C. Cutter Housing
D. Release Button
E. Motor Unit
F. Switch Button
G. Reversal Button (REV)
H. Light
I. Fine Grinding Plate
J. Medium Grinding Plate
K. Auger
L. Knife
M. Coarse Grinding Plate
N. Screw Ring
O. Spacer
P. Stuffing Tube
Q. Former
R. Cone
S. Release Lever
Introduction:
This appliance is equipped with a thermostat system. This system will automatically cut
off the power supply to the appliance in case of overheating.
If your appliance suddenly stops running:
1. Pull the main plug out of the socket.
2. Press the switch button to turn off the appliance.
3. Let the appliance cool down for 60 minutes.
4. Put the main plug in the socket.
5. Switch the appliance on again.
Please contact the dealer or an authorized service center if the thermostat system is
activated too often. If you plug the appliance in, the indicator light will be on.
CAUTION: In order to avoid a hazardous situation, this appliance must never be con-
nected to a timer switch.
Important Safeguards:
1. Read these instructions for use carefully and look at the illustrations before using the
appliance.
2. Keep these instructions for future reference.
3. Verify that the voltage indicated on the appliance corresponds to the local main voltage
before you connect the appliance.
4. Never use any accessories or parts from other manufacturers. Your guarantee will
become invalid if such accessories or parts have been used.
5. Do not use the appliance if the main cord, the plug or any other parts are damaged.
6. If the main cord of this appliance is damaged, it must always be replaced by the manu-
facturer or an authorized service center in order to avoid hazardous situations.
Advertisement
