Lenovo ThinkPad T400s Hardware Maintenance Manual page 80

72
ThinkPad T400s Hardware Maintenance Manual
Table 7. Status indicators
Indicator
1
Speaker mute
2
Microphone
mute
3
Wireless LAN,
Wireless WAN,
or WiMAX
status
4
Bluetooth
wireless or
Wireless USB
status
5
Device access
6
Power on
7
Serial Ultrabay
Slim device
status
8
Fingerprint
reader status
9
Caps lock
10
Sleep (standby
for Windows
XP) status
Meaning
Orange:
The speaker is on mute. To set the speakers on mute or
unmute, press the speaker mute button.
Orange:
The microphone is on mute. None of the recording
devices is available while the microphone mute is on by
default.
Green: The wireless LAN feature (the IEEE 802.11 b/g standard,
802.11 a/b/g, or 802.11n), wireless WAN feature, or
WiMax feature is on, and the radio link is ready for use.
Blinking green:
Data is being transmitted.
Green: The Bluetooth wireless feature or wireless USB feature is
on, and the radio link is ready for use.
Blinking green:
Data is being transmitted.
Green: Data is being read from or written to the hard disk
drive, the diskette drive, or the drive in the Serial Serial
Ultrabay Slim device. When this indicator is on, do not
put the computer into sleep (standby) mode or turn off
the computer.
Note: Do not move the system while the green device access
light is on. Sudden physical shock could cause drive errors.
Green: The computer is on and ready to use. This indicator
stays lit around the power-on button whenever the
computer is on and is not in sleep (standby) mode.
Green: A Serial Ultrabay Slim device is installed and in use.
Blinking green:
A Serial Ultrabay Slim device is in the process of being
detached.
Turn off:
A Serial Ultrabay Slim device is ready to be attached or
detached.
Green: The fingerprint reader is ready to swipe.
Blinking green:
The fingerprint is being authenticated or has been
authenticated.
Blinking orange:
The fingerprint could not be authenticated.
Green: Caps Lock mode is enabled. To enable or disable Caps
Lock mode, press the Caps Lock key.
Green: The computer is in sleep (standby) mode.
Blinking green:
The computer is entering sleep (standby) mode or
hibernation mode, or is resuming normal operation.