Using Adaptive Cruise Control - Ford 2015 FUSION Owner's Manual

Hide thumbs Also See for 2015 FUSION:
Table of Contents

Advertisement

USING ADAPTIVE CRUISE
CONTROL
(If Equipped)
WARNINGS
Always pay close attention to
changing road conditions, especially
when using adaptive cruise control.
Adaptive cruise control cannot replace
attentive driving. Failing to follow any of
the warnings below or failing to pay
attention to the road may result in a crash,
serious injury or death.
Adaptive cruise control is not a crash
warning or avoidance system.
Adaptive cruise control does not
detect stationary or slow moving
vehicles below 6 mph (10 km/h).
Adaptive cruise control does not
detect pedestrians or objects in the
roadway.
Adaptive cruise control does not
detect oncoming vehicles in the
same lane.
Do not use the adaptive cruise
control when entering or leaving a
highway, in heavy traffic or on roads
that are winding, slippery or unpaved.
Do not use in poor visibility,
specifically fog, rain, spray or snow.
Note: It is your responsibility to stay alert,
drive safely and be in control of the vehicle
at all times.
The system adjusts your speed to maintain
a proper distance between you and the
vehicle in front of you in the same lane. You
can select from one of four gap settings.
Fusion/Mondeo (CC7), enUSA
Cruise Control
E144501
The controls for using your cruise control
are located on the steering wheel.
Switching the System On
Press and release ON.
E144529
E164805
The current gap setting and SET also
display.
Setting a Speed
1.
Accelerate to the desired speed.
2. Press and release SET+. The vehicle
speed is stored in the memory.
3. The information display shows a green
indicator light, current gap setting and
desired set speed.
4. Take your foot off the accelerator
pedal.
188
I n f o r ma t i o n P r o v i d e d b y :
The information display shows
the grey indicator light.

Advertisement

Table of Contents
loading

Table of Contents