Adjusting The Head Restraint; Tilting Head Restraints - Ford 2015 FUSION Owner's Manual

WARNINGS
Install the head restraint properly to
help minimize the risk of neck injury
in the event of a collision.
Note: Adjust the seat back to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
Front seat and rear seat outboard head
restraints
E138642
Rear center head restraint
E138645
Fusion/Mondeo (CC7), enUSA
Seats
The head restraints consist of:
A An energy absorbing head
restraint
B Two steel stems
C Guide sleeve adjust and unlock
button
D Guide sleeve unlock and remove
button

Adjusting the Head Restraint

Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1. Press and hold button C.
2. Push the head restraint down.
Removing the Head Restraint
1. Pull the head restraint up until it
reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until in
locks.

Tilting Head Restraints

The front head restraints have a tilting
feature for extra comfort. To tilt the head
restraint, do the following:
129
I n f o r ma t i o n P r o v i d e d b y :