Table of Contents
Advertisement
Autoclave-Specifi c Instructions
For questions regarding the performance of an autoclave, please contact the autoclave manufacturer�
Connecting to a SciCan STATIM 2000/5000
Use of the VistaCool systems with SciCan STATIM 2000 & 5000 autoclave units requires no additional steps
beyond the general instructions outlined in pages 6-12 of this guide�
Connecting to a Midmark M3
1
Shut off the M3 and disconnect its power cord�
Connect the high-temperture Tefl on
2
provided to the back of the M3 as shown, and
also to the high-temperature Kynar inlet on
the VistaCool manifold�
1
0
3
IMPORTANT INFORMATION
Midmark M9 & M11 Compatibility
VistaCool Model V7502 has been verifi ed for installation on Midmark M9 & M11 units with the use of
the S7560 adapter kit� Only M9, M9D, M11 and M11D (-02X, -03X) units with
connected to VistaCool� First generation models with
The single-unit VistaCool (V7501) should not be used with Midmark M9 or M11 units� The double-unit
VistaCool (V7502) is capable of handling any two compatible autoclaves�
Complete installation instructions for the M9 & M11 units are included with the S7560 adapter kit�
© 2000-2015 Vista Research Group, LLC. All rights reserved.
tubing
®
2
Insert the 3�5mm mono plug provided with
3
the VistaCool into the back of the M3 to
override the fl ow display alert function�
4
Reconnect the M3's power cord and resume
operation�
red
displays (-0XX) are not compatible�
2
green
displays can be
13
Advertisement
Table of Contents
