Page 1
Installation Guide & Owner’s Manual Model V7501 Model V7502 Autoclave Autoclaves VistaCool can be used with: Midmark M3 SciCan STATIM 2000 Direct-to-Drain Thermal Reduction Midmark M9* SciCan STATIM 5000 System for Autoclave Wastewater Midmark M11* Includes CSA-Certifi ed VistaCheck Dual Check...
Autoclave-Specific Instructions ��������������������������������������������������������������������������������������������������������������������������������13 Maintenance ������������������������������������������������������������������������������������������������������������������������������������������������������������������14 Troubleshooting �����������������������������������������������������������������������������������������������������������������������������������������������������������14 VistaCool Limited Warranty ���������������������������������������������������������������������������������������������������������������������������������������15 VistaCool System Information & Specifications ����������������������������������������������������������������������������������������������������16 Distribution VistaCool systems are sold through dental and medical dealers throughout North America by: Midmark Corporation SciCan Inc. SciCan Ltd. Midmark�com SciCan�com SciCan�com...
VistaCool� First generation models with displays (-0XX) are not compatible� The VistaCool tank must be installed so that the top of the water tank is ABOVE the connection to the drain adapter� Please see page 12 for important tank positioning details�...
Tefl on® NOTE: A fi tting (tee, compression fi tting, etc�) for connecting to cold water supply line is not included in this VistaCool kit and must be supplied by the installer/plumber� See Plumbing section for more details� Installation Guide & Owner’s Manual...
NOTE: When installing the black 1/4” OD condensate line with a V7501 system, make sure to install the white 1/4” plug in the remaining open fi tting on the adapter to prevent water from fl owing out of the drain� When installing a V7502 system, connect a black condensate line to each of the two 1/4”...
NOTE: A 9’ length of the high temperature Tefl on tubing is included with each single (V7501) and an 18’ length is included with each double (V7502) VistaCool system� An additional 18’ length of Tefl on tubing is available as an accessory (TU749)�...
• Cut the tubing to a suffi cient length so that no tubing line is tight or stressed, and so the VistaCool tank assembly can be moved within the cabinet easily�...
Page 11
V7501 TO AUTOCLAVE MANIFOLD 2� Connect the cold water supply to the water tank using the blue, semi-transparent (1/4” OD x 1/8” ID) polyurethane tubing to the system� Continue the tubing from the outlet of the VistaCheck to the top stainless hose barb on top of the brass water valve on the thermal regulator� Optional: warm the end of the tubing with hot water before pushing it over the barb and make sure it is pushed down completely over the stem of the barb and is fl ush with the hex stainless base of the barb�...
Tank Positioning The VistaCool system should be set on a hard, level surface and installed so that the top of the water tank is above the coolant overfl ow fi tting on the drain adapter assembly, and below the autoclave outlet� If the tank is below the level of the coolant overfl ow fi tting, the system may not operate properly�...
IMPORTANT INFORMATION Midmark M9 & M11 Compatibility VistaCool Model V7502 has been verifi ed for installation on Midmark M9 & M11 units with the use of the S7560 adapter kit� Only M9, M9D, M11 and M11D (-02X, -03X) units with...
Maintenance The VistaCool direct-to-drain thermal reduction systems for autoclaves have been designed to require virtually no maintenance� However, it’s recommended that operators periodically verify that the tubing and connections remain leak-free, are free of mineral deposits or debris, and are not compromised in any way�...
(VRG) will repair or replace to the original user any thereof without being obliged to provide such change portion of a VistaCool which proves defective due or improvement of units sold and/or shipped prior to to defective materials or workmanship of VRG�...
VistaCool System Information Thank you for choosing the VistaCool Direct-to-Drain Thermal Reduction System for Autoclave Wastewater for your practice! The following chart is for necessary information for future reference� Please fill it out completely and keep this manual in a convenient place for ready access and reference�...