Connections And Operation - Yamaha THR10 Owner's Manual

Mac OS X
Mac OS X 10.7/10.8 (32-bit, 64-bit)
OS:
CPU: Intel dual core CPU
Memory: 2 GB or more
Audio Device: CoreAudio compatible
Display Resolution: 1280 x 800 — full color
Equipped with a USB connector
Interface:
Free disk space of 8 GB or more;
Hard Disk:
high-speed hard disk
* A DVD drive is required for installation.
* In order to have continuous use of Cubase AI,
including support and other benefits, you will need
to register the software and activate your software
license by starting it while the computer is con-
nected to the internet.
* Note that the system requirements may be slightly
different from those described above depending on
the particular operating system.
* Before using, please understand that even if your
computer meets all operating requirements, the
software may not function correctly.
[Installing Cubase AI]
1. Start the computer and log on to the Admin-
istrator account.
2. Insert the Cubase AI DVD-ROM into the DVD-
ROM drive.
3. When the "WELCOME TO CUBASE AI"
window appears, choose your preferred
language by clicking on the corresponding
national flag icon.
4. Click "Install CUBASE AI."
5. Follow the onscreen instructions to install the
software.
* In order to have continuous use of Cubase AI,
including support and other benefits, you will need
to register the software and activate your software
license by starting it while the computer is con-
nected to the Internet. Click the "Register Now"
button shown when the software is started, then fill
in all required fields for registration. If you do not
register the software, you will be unable to use it
after a limited period of time expires.
Connecting a Computer to the Unit
n Connections and Operation
1) Playback audio files on the computer
through the THR
Install the Yamaha Steinberg USB Driver, and se-
lect the model name (THR10/THR10C/THR10X/
THR5/THR5A) of the connected THR amp as the
computer's audio output (page 16).
Use the supplied USB cable to connect the
computer's USB jack to the USB jack on the THR
as shown in the diagram below.
This lets you play audio files on the computer
through the speakers on the THR. Connect
your guitar to the unit and play along. On the
THR10/10C/10X the audio volume is controlled
using the USB/AUX OUTPUT control knob.
* On the THR5/5A, use the volume control on the
computer to adjust the audio volume.
Guitar sound
audio playback
Playback an audio
file on the com-
puter.
Use the USB/AUX
OUTPUT control knob
to adjust volume of the
audio file.
+
17