Nvidia DIGITS DEVBOX User Manual page 21

3.
Grab the hard disk and pull it straight out.
4.
Insert the replacement hard disk into the slot.
5. Close the latch to secure.
To ensure that the hard disk is inserted properly,
a)
Lower the latch just to the point where you need to push it closed.
b)
Push the hard disk to make sure it is securely seated.
c)
Push the latch down all the way until it snaps in place.
You can now power up your DevBox and rebuild the array as described in the
following section.
DIGITS DevBox
Setup and Maintenance
21