Advertisement
WEDA
W50
R
6.5 NOTE
Do not drive the pool vacuum outside the pool water for more than 5 minutes per hour. The vacuum and the
floating cable are cooled by the pool water.
Use only WEDA Original parts for service at all times. One incorrectly used O-ring may cause costly
damage to the pool vacuum.
Do not pull in the power cable at any time.
Do not pull the cables along the ground. This may cause unnecessary wear on the cable covers.
Straighten out the floating cable regularly. The easiest way to do this is to run the vacuum in circles in
the pool.
Always disconnect the vacuum from the outlet before making any service and maintenance.
The control box, being 110/230 V may only be serviced by authorized electricians. It is your responsibi-
lity to know the local laws and regulations.
The pool vacuum can only be used in water filled pools.
Do not use the pool vacuum in explosive atmospheres.
Flush the cleaner with fresh water after usage. Also under the cover.
6.6 Wear Parts
500 019 Filter 120 micron
500 009 Brush, right side
500 003 Brush, left side
741 297 Drive belt for brush
740 388 Grease, Non-toxic
740 209 Oil for gear
Batteries for radio remote, 3 ea. 1,5 V AAA
Hide quick links:
Advertisement
