NEC LT260 User Manual page 34

INSTALLATION AND CONNECTIONS
Connecting Your VCR or Laser Disc Player
Video cable (not supplied)
VCR/ Laser disc player
Use common RCA cables (not provided) to connect your VCR, laser disc
player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or docu-
ment camera.
2. Connect one end of your RCA cable to the video output connector on the
back of your VCR or laser disc player, connect the other end to the Video
input on your projector. Use an audio cable (not supplied) to connect the
audio from your VCR or laser disc player to your audio equipment (if
your VCR or laser disc player has this capability). Be careful to keep your
right and left channel connections correct for stereo sound.
Making Connections
VIDEO IN S-VIDEO IN
S-video cable (not supplied)
AUDIO OUT
S-VIDEO OUT
R L
VIDEO OUT
Audio cable (not supplied)
E-34
http://www.pureglare.com.au
Audio equipment
AUDIO IN
L R