NEC LT260 User Manual page 138

APPENDIX
Picture: Controls the video adjustment of the projector.
Brightness
Brightness
Contrast
Contrast
Color
Color
Hue
Hue
Sharpness
Sharpness
* The functions that can be controlled will vary depending on the signal
being input to the projector.
Source Select: This switches the input connector of the projector.
RGB1 .............. Switches to the RGB 1 connector.
RGB2 .............. Switches to the RGB 2 connector.
Video ............... Switches to the Video connector.
S-Video ........... Switches to the S-Video connector.
Viewer ............. Switches to the Viewer.
LAN ................. Switches to a LAN signal.
Projector Status: This displays the condition of the projector.
Remaining Lamp Time ... Displays the remaining life of the lamp as a per-
Lamp Hour Meter ...... Displays how many hours the lamp has been
Projector Usage ........ Displays how many hours the projector has been
Error Status ............... Displays the status of errors occurring within the
Refresh ..................... Updates the display of the following conditions.
... Increments the brightness adjustment value.
... Decrements the brightness adjustment value.
...... Increments the contrast adjustment value.
...... Decrements the contrast adjustment value.
........... Increments the color adjustment value.
........... Decrements the color adjustment value.
............. Increments the hue adjustment value.
............. Decrements the hue adjustment value.
... Increments the sharpness adjustment value.
... Decrements the sharpness adjustment value.
centage.
used.
used.
projector.
http://www.pureglare.com.au
E-138