Table of Contents
Advertisement
R To answer using another telephone connected to
the [EXT] jack of this unit, lift the handset, then
press MStopN on the unit to talk to the other party.
* The pictured model is KX-MB2030.
R To answer using another telephone connected to
the same telephone line as this unit, lift the
handset and talk to the other party.
* The pictured model is KX-MB2030.
R The number of rings is determined by the "Silent
fax recognition ring count" (feature #436 on
page 63).
R Callers will hear a ring back tone different from
the one generated by the telephone company.
B If you do not answer the call, the unit will activate
the fax function.
R Some fax machines do not generate fax calling
tones when sending faxes, therefore the unit will
try to receive a fax even if no fax calling tone is
detected.
6.9 Using the unit with an
answering machine
6.9.1 Setting up the unit and an answering
machine
1
Connect the answering machine (A).
R Answering machine is not supplied. The
illustration is just an example.
R Remove the stopper (B) if attached.
B
* The pictured model is KX-MB2030.
2
Set the number of rings on the answering machine to
4 rings or less.
R This will allow the answering machine to answer
the call first.
3
Record a greeting message on the answering
machine.
R We recommend you record a message up to 10
seconds long, and not to pause for more than 4
seconds during the message. Otherwise, neither
machines will function correctly.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 47).
R If you set to FAX ONLY mode, change the ring
count in FAX ONLY mode to more than 4
(feature #210 on page 58).
6
Make sure each of the following is unique:
– the remote access code of the answering
machine
6. Fax
A
49
Advertisement
Table of Contents
