Memory Functions - Epson Stylus CX4100 Service Manual

EPSON Stylus CX4100/CX4200/CX4700/CX4800/DX4200/DX4800/DX4850
1.6.4.1 Error Status
Mechanical fatal error
This error occurs when one of the followings happens.
• The carriage could not recognize the home position.
• The carriage is put an unusual external force when the power is on.
• The movement of the carriage is obstructed during printing.
Paper jam error
The printer fails to detect either the leading edge or back-end of the paper after
performing paper feeding for specified number of times.
Paper out error
This error occurs when one of the followings happens.
• There is no paper on the tray.
• Paper has stopped before the PE sensor, or paper could not be fed correctly.
• Papers are set without setting their edges against the right edge guide.
Ink end
There is no ink remaining in the installed Bk, Y, M, or C cartridge(s), or ink
cartridge(s) is not installed.
Liquid waste overflow
Amount of ink discharged while cleaning or flushing has exceeded the given level.
Double feed error
This error only occurs when performing duplex printing. There are two following
cases:
• Blank paper is ejected when loading papers.
• The length of the paper is determined to be long when ejecting the paper.
PRODUCT DESCRIPTION

1.6.5 Memory Functions

1.6.5.1 Parameters that are retained while mode transition
The following parameters are retained for each mode while the mode transition from
"Copy" mode to "Memory Card Print" mode or vice versa.
"Paper Type" and "Paper Size" are retained for each mode as default.
Zoom is retained for "Copy" mode as default.
NOTE: Paper Type and Paper Size are commonly used in "Print From Index
Sheet" and "Print All / DPOF".
1.6.5.2 Parameters that are retained when power is turned off
The following parameters are retained when the unit's power is off. They are listed
along with the corresponding memory functions in the table below.
Copy mode is selected when this unit is turned on apart from the mode when it was
turned off before.
Paper Type and Paper Size are retained for each mode as default.
Zoom is retained for copy mode as default.
Mode
Copy
Memory Card Print
(Only for CX4700/CX4800/
DX4800/DX4850)
Note *1: The panel indicator only. The printer chalks 10 x 15 format up to 4 x 6 format.
Control Panel
Table 1-53.
Parameter retained in memory Factory setting
Paper Type Plain Paper
Paper Size Letter or A4
Zoom (The status of Fit to Page) 100% (OFF)
Paper Type Photo Paper
Paper Size 4"x 6" or 10x15
Revision A
*1
58