Epson Stylus CX4100 Service Manual page 156

EPSON Stylus CX4100/CX4200/CX4700/CX4800/DX4200/DX4800/DX4850
4.4.21 Front Frame
External view
Front Frame
2
C.B.S. 3x6 F/Zn (7±1kgfcm)
Ribs
Figure 4-39. Removing Front Frame
DISASSEMBLY/ASSEMBLY
3
A D J U S T M E N T
R E Q U I R E D
1
Printer Section
Part/Unit that should be removed before removing Front Frame
Document Cover / Paper Support Assy. / Scanner Unit / Panel Unit /
Housing Upper / Print Head / Printer Mechanism / Main Board Unit /
CR Guide Frame / CR Motor / Carriage Unit
Removal procedure
1. Remove the screws (x3, ) that secure the Front Frame, and remove the
Front Frame from the Printer Mechanism.
Match the ribs (x3,
holes of the Front Frame.
Tighten the screws in the order as shown in the figure.
After replacing the Front Frame with a new one, always apply
grease KEN to the specified parts.
Refer to Figure 6-10 (p192)
•
After removing/replacing the Front Frame, perform the
adjustment in the following order. (Refer to Chapter 5
"ADJUSTMENT")
1. "Bi-D adjustment"
2. "First Dot Adjustment"
Revision A
) of the Main Frame with the positioning
for details.
156