Star SPDE1ARB Installation And Operation Instructions Manual
Heated
peristaltic dispenser
Hide thumbs
Also See for SPDE1ARB:
- Installation and operation instructions manual (16 pages) ,
- Installation and operation instructions manual (16 pages)
Related Manuals for Star SPDE1ARB
Summary of Contents for Star SPDE1ARB
- Page 1 HEATED PERISTALTIC DISPENSER MODEL SPDE1ARB, SPDE2ARB SPDE1HP Installation and Operation Instructions 2M-Z7537 Rev. G 2/16/07 SPDE2ARB...
-
Page 2: Safety Symbol
RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. -
Page 3: Specifications
SPECIFICATIONS SPDE1ARB-120V Capacity: One 160 ounce pouch Electrical: 120V, 60 hertz, single phase, 820 Watts, 7 amps Cord: 6 ft. length Plug: 120V - NEMA 5-15P Dimensions: 9-7/16" W x 19-9/16" D x 30-5/16" H (23.97 W x 49.69 D x 77.0 H cm) Net Weight: 42 lbs. -
Page 4: General Installation Data
CAUTION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. Before using your new equipment, read and understand all the instructions &... -
Page 5: Portion Control
PORTION CONTROL This dispenser is supplied with a portion control timer. This portion control is based on a time setting. Variations in product temperature and consistency will affect the dispensed amount. To insure a consistent portion, use product that is at the correct temperature (145°F to 160°). SPDE2 models have a Portion Control Label showing approximate settings for portion size in oz, see Fig 1. -
Page 6: General Cleaning Instructions
CHANGING TEMPERATURE SET-POINT The dispenser is preset at the factory for a temperature of 145°F. If a different temperature is required, the set point can be changed in a range from 140°F to 160°F. To change the temperature: 1. Press SET. "SP" will appear in the display. 2. - Page 7 LIMITED EQUIPMENT WARRANTY All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies.
- Page 8 SPDE2ARB PERISTALTIC CHEESE DISPENSER STAR MANUFACTURING INTL, INC. 10 SUNNEN DRIVE P.O. BOX 430129 ST. LOUIS, MO 63143 CAUTION: ALWAYS TURN THE FITMENT UNIT OFF WHEN CHANGING A BAG OR SPRING PUMP HEAD CLEANING THE PUMP ENGAGED SPRING MECHANISM RELEASED...
- Page 11 NEUT SW-1 SW-2...
- Page 13 NAMEPLATE MODELS: SPDE1ARB-120V & 230V STAR MANUFACTURING INTERNATIONAL, INC. SPDE1HP-120V SPDE2ARB-120V SK2071 REV D 1-10-07...
-
Page 14: Parts List
2E-Z0512 CORDSET, EUR 10A SPDE1ARB-230V 2U-Z4600 FAN A/C 110CFM 120V 2T-Z4666 THERMOSTAT 165F 2E-Z7201 TEMPERATURE CONTROL WITH PROBE SPDE1ARB, SPDE1HP M2-Z10046 CONTROLLER, PROGRAMMED SPDE2ARB 2R-Z6774 KNOB, DAVIES 4200 10-24 x 1/4 2R-Z0872 KNOB, DAVIES #3004-S IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED... - Page 15 PARTS LIST Februay 16, 2007, Rev. G SPDE1ARB/SPDE1HP, SPDE2ARB Heated Peristaltic Dispensers MODEL Number Part Number Unit Description Number 2P-9615 BEARING-SELF ALIGN 2P-9615 BEARING-SELF ALIGN SPDE2ARB 2M-Z3607 LABEL-OPERATING SPDE1ARB 2M-Z10311 LABEL-OPERATING SPDE2ARB 2K-Z2895 BUSHING HEYCO OCB-500 2A-Z3429 SPACER-NYLON .175X.375X.5 M2-Z10302...
- Page 16 STAR MANUFACTURING 10 Sunnen Drive, St. Louis, MO 63143 U.S.A. (800) 807-9054 (314) 781-2777 Parts & Service (800) 807-9054 www.star-mfg.com...
Need help?
Do you have a question about the SPDE1ARB and is the answer not in the manual?
Questions and answers