(2700W and 2000MFR models grub screw on left hand solid fuel burning appliances. should be 200mm min (150mm for 1800W mini series). If only) and the flue spigots using a small amount of door (see fig2). the flue damper has been fitted (2700W Standard and fire cement on the joints.
Page 3
The chimney is the key to the successful installation of your number ASI) at floor level. For fireplaces located on Dovre appliance. If the chimney is in poor condition or of inner walls, it will be necessary to bring an air the wrong design or construction, the performance of the supply from under the floor.
Please complete and return this section within seven days of purchase to: For overnight burning, fully close the lower air control Remove the rope seals from the doors. Dovre Castings Ltd, Weston Works, Weston Lane, Tyseley, Birmingham B11 3RP. and partly close or fully close the top air controls (if fitted).
Need help?
Do you have a question about the 1800W and is the answer not in the manual?
Questions and answers