Programming Channel Memory - Toshiba 36SW9UA Service Manual

• First, use the Auto tuning feature to preset all the active channels in your area automatically. Then, arrange the preset
channels with the Manual tuning feature so that you can tune into only desired channels.
• Use the Channel search operation if desired channels cannot be preset with the Auto tuning or if you would like to preset
channels to specific position numbers one by one.
• DO NOT PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING.
To preset channels (Auto tuning, Manual tuning)
Auto tuning
1
Select the first program position number you want to
start the Auto tuning with the CH st button or the
Number buttons.
2 Press the MENU button, then press the
to display the SET UP menu.
3
Press the or button to select Auto tuning.
4
Press and hold the ENTER button for a several sec-
onds to start the automatic search. The search will be-
gin for all available stations. Bullet will move along the
line as the search progresses. DO NOT PRESS ANY
BUTTONS WHILE THE AUTOMATIC SEARCH IS IN
PROGRESS.
If you make a mistake, simply repeat steps 4 to start
again from the beginning.
5
When the automatic search is complete, the TV will
automatically return to the first program position.
6 Press the CH s or CH t button to view the programmed
position.

PROGRAMMING CHANNEL MEMORY

< >
or button
– 21 –
Manual tuning
1
Press the MENU button, then press the
to display the SET UP menu. Press the
ton to select Manual tuning.
2
Press the ENTER button to display the Manual tuning
menu. Press the
gram position you want to arrange.
3
Press the ENTER button to display the breakdown
menu.
< >
Press the or button to select an item, then press
the or button to adjust the item as shown be-
low.
Manual tuning
Programme
1 B/G A
Store MENU Back
B D
A C
< >
or button
or
or button to select the pro-
EXIT Watch TV
F H
E G
but-