Remote Controller Operation - Marantz SR4023 User Manual

ENGLISH

REMOTE CONTROLLER OPERATION

THE CONTROLLABLE FUNCTION TABLE
BUTTON NAME
SOURCE POWER
2
9
SLEEP / ;
T.DISP / MENU
(UP) / TUNE+
(DOWN) / TUNE-
(LEFT) / PRESET-
(RIGHT) / PRESET+
ENTER
SETUP
BAND / INFO
0-9
CLEAR
MEMO
P.SCAN / ∞
PTY / §
F.DIRECT / 5
T.MODE / 6
18
FUNCTION
CD DVD
POWER ON / Standby POWER ON / Standby POWER ON / Standby
Starts playback Starts playback Starts playback
Stops playback Stops playback Stops playback
Pauses a disc that's Pauses a disc that's Pauses a disc that's
playing playing
Displays a DVD disc
Not for use Not for use
menu
Not for use Move the cursor upward Not for use
Move the cursor
Not for use Not for use
downward
Not for use Move the cursor leftward Not for use
Not for use Move the cursor rightward Not for use
Selects the current menu
Not for use Not for use
option
Not for use Not for use Go to the setup Menu
Displays the disc
Not for use Not for use
playback information
Inputs the numeric Inputs the numeric Not for use
Not for use Not for use Resets counter
Not for use Not for use Not for use
Skips to the start of the Skips to the start of the Skips to the start of the
current track current track or chapter current track
Skips to the next track or
Skips to the next track Skips to the next track
chapter
Fast rewind the playing Fast rewind the playing Fast rewind the playing
track chapter
Fast forward the playing Fast forward the playing Fast forward the playing
track chapter
REMOTE CONTROL CODE SETTING
The remote control unit contains 3 sets of remote
control codes, and it can be used to control up to 3
receivers in one location. To control a second or third
TAPE
receiver, select the remote control code as explained
below. The selected receiver can be operated from
the remote control.
• When the unit is shipped from the factory, the main
unit and remote control are set to RECEIVER1.
playing
1.
RECEIVER2
To set the remote control to RECEIVER2,
hold down both the AMP button and 2 number
button on the remote control for at least fi ve
seconds.
RECEIVER3
To set the remote control to RECEIVER3,
hold down both the AMP button and 3 number
button on the remote control for at least fi ve
seconds.
2.
Also set the main unit's remote control setting
to the same setting as the remote controller.
To change the main unit's remote control
setting, hold down AMP and press the INFO
buttons on the remote controller; the remote
control setting ("RECEIVER 1," "RECEIVER
2" or "RECEIVER 3") will be displayed in
the display window on the main unit and the
track
main unit setting will be changed to the same
setting as that of the remote controller.
track
Note:
To set the remote control back to RECEIVER1, hold
down both the AMP button and 1 number button on
the remote control for at least fi ve seconds.
AMP
INFO
1, 2, 3