Marantz SR4023 User Manual page 20

SORTING PRESET STATIONS
RECEIVER SR4023
UP
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ
L C R
LFE
PCM
SL S SR
DOWN
INPUT
SELECTOR VOLUME
TUNING/
S.DIRECT DIMMER F/P BAND PRESET T.MODE MEMORY CLEAR MUTE
PHONES
If you have stations memorized, and there is a gap in
the sequential order:
I.e. the stations are stored as follows
1) 87.5 MHz
2) 93.1 MHz
3) 94.7 MHz
10) 105.9 MHz
Since there are no stations programmed for presets
4-9, you can have preset 10 become preset 4.
To sort the numbers, press the TUNING 4 button
while pressing the MEMORY button.
"PRESET SORT" will appear on the display and
sorting will be done.
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset channel
to be entered using alphanumeric characters.
Before name inputting, you need to store preset
stations with the preset memory operation.
4. 5. 2. 5. 6.
RECEIVER SR4023
UP
SURROUND
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B EQ
L C R
PCM LFE
SL S SR
DOWN
T
CTOR TUNING/ VOLUME
S.DIRECT DIMMER F/P BAND PRESET T.MODE MEMORY CLEAR MUTE
PHONES
5.
4.
2.
5.
6.
1.
Recall the preset number to be inputted name
with the method described in "Recalling" a
preset station.
2.
Press the MEMORY button on the front panel
or press the MEMO button on the remote
controller for more than 3 seconds.
3.
The left most column of the station name
indicator fl ashes, indicating the character entry
ready status.
4. When you press the TUNING 3 or 4 buttons on
the front panel or the TUNING + or – buttons on
the remote controller, alphabetic and numeric
characters will be displayed in the following
order:
A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +
→ / → (Blank) → A
UP →
← DOWN
5.
After selecting the fi rst character to be entered,
press the MEMORY button or press the MEMO
button on the remote controller.
The entry in this column is fi xed and the next
column starts to fl ash. Fill the next column the
same way.
To move back and forth between the characters,
press the F/P button and press the TUNING 3
or 4 buttons or press TUNING + or – buttons
on the remote controller.
Note:
Unused columns should be fi lled by entering blanks.
6.
To save the name, press the MEMORY button
on the front panel or remote controller for more
than 2 seconds.
Ten keypad Press, press again, press again, etc.
→ → → →
1
A B C 1 A
→ → → →
2
D E F 2 D
→ → → →
3
G H I 3 G
→ → → →
4
J K L 4 J
→ → → →
5
M N O 5 M
→ → → →
6 P Q R 6 P
→ → → →
7 S T U 7 S
→ → → →
8 V W X 8 V
→ → → →
9 Y Z space 9 Y
→ → → →
0
– + / 0 –
ENGLISH
17