System Setup
II
Interactive box
What you need for the following steps:
ADAPTiQ audio calibration headset
Remote control with batteries
SoundTouchTM wireless adapter
USB cable
IMPORTANT!
Before you start, make sure your speakers and Acoustimass® module are in
their final positions.
Do not connect any devices to the control console at this time. The
instructions provided on your TV will tell you when to do this.
A.
Slide the battery compartment cover off the back of the remote control.
AA (IEC LR6) batteries (4)
B.
Install four AA (IEC LR6) batteries, matching the polarity markings(+ and-)
to the markings inside the battery compartment.
C.
Slide the battery cover back into place.
18- English