Ignition Switch - Honda 2007 S2000 Online Reference Owner's Manual

Main Menu
Table of Contents

Ignition Switch

The ignition switch has three
positions: LOCK (0), ACCESSORY
(I), and ON (II).
LOCK (0) You can insert or
remove the key only in this position.
To turn the key, push it in slightly.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
62
You can
ACCESSORY (I)
operate the audio system and the
accessory power socket in this
position.
This is the normal key
ON (II)
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
The engine can be started with the
key in this position by pressing the
engine START button (see page
122 ).
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver's door. Remove the key to
turn off the beeper.
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control of the
vehicle.
Remove the key from the
ignition switch only when
parked.