Honda 2007 S2000 Online Reference Owner's Manual page 194

Hide thumbs Also See for 2007 S2000:
Table of Contents

Advertisement

Main Menu
Table of Contents
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages
194
and
195
diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
1.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2.
Remove the cover from the fuse
box.
, or the
3.
Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
BLOWN
FUSE PULLER
4.
Check the smaller fuses in the
under-hood fuse boxes and all the
fuses in the interior fuse box by
pulling out each one with the fuse
puller provided in the interior fuse
box.
Fuses
CONTINUED
191

Advertisement

Table of Contents
loading

Table of Contents